sql

BHT3 HYDROSTATIC TRANSMISSION BENCH Brand IDSystem France

Rp. 123
Last Updated
15 Jun 2022
Country Origin
France
Minimum Order
1 Unit

Specification of BHT3 HYDROSTATIC TRANSMISSION BENCH Brand IDSystem France

Alat Laboratorium Umum

BHT3 HYDROSTATIC TRANSMISSION BENCH

The hydrostatic transmission bench BHT3 is intended for trainings in mobile hydraulics. It
enables to understand the basic principles of a closed circuit. It is equipped with a POCLAIN
closed circuit pump with its configured calculator by computer. All the receivers are coupled to
an inertial force or an antagonist motor to simulate a resistance force.

TECHNICAL SPECIFICATIONS:
 1 tank with a capacity of 50 liters
 1 air filter filling plug
 1 visual level equipped with a low-level
contact, which is connected to a red fault
indicator on the control panel
 1 return suction filter of 10μ ABS equipped
with an electric clogging indicator, which is
connected to a red fault indicator on the
control panel
 1 hydraulic power unit including a 3-phase
electric motor of 5.5KW 400V 1000rpm and a
hydraulic pump of 18cm3
This pump is equipped with:
- 1 control joystick
- 2 proportional solenoid valves for the
flow control on the channel A and B
- 1 booster pump of 7cm3
- 1 boost pressure relief valve adjusted
at 20b
- 1 pressure relief valve adjusted max at 150b on the channel A and B
- 2 booster check valves
- 1 manual by-pass valve
 1 isolation valve in a suction pressure control equipped with an electrical contact, which
can stop the HPU start-up in case of valve closing.
 1 hydrostatic transmission flushing valve
 1 receiver hydraulic motor of 11.3cm3 coupled with an inertial load of 40kg
 1 receiver hydraulic motor of 19cm3 with its antagonist motor of 28cm3
. The hydraulic
motors are coupled with a steel coupling with de-clutching system
 2 inductive sensors are fitted on the hydraulic motor to send information to the control
display
 1 brake block fitted on the antagonist motor is equipped with a pressure relief valve of 7 /
100b on each channel, and with a bypass manual control valve 2/2.
 1 air-cooler 2-pass to ensure drain cooling and oil in the hydraulic system to return to the
tank

Lihat Selengkapnya

Untuk keterangan lebih lanjut, silahkan download PDF ini :

Ulasan

/5
Ulasan
5
4
3
2
1

Foto dari Pembeli

Ulasan dari Pembeli

Filter
Semua
Dengan Foto
5
4
3
2
1
Request a Quote
Produk Siap di Pesan
Rp 0
1